Minuit Une IVL PHOTON, Service Manual

Page: 34 / 63

IVL™ Photon Service Manual AA 34
7.3
Gently unplug the connector from the
MT1-000122 PCB card and slide the
card out.
7.4
Address the MT1-000122 PCB card
according to the MT1-000935 tilt
module you want to replace.
(Switch towards the bottom = 1)
111 = 8
110 = 7
101 = 6
100 = 5
011 = 4
010 = 3
001 = 2
000 = 1
Tilt # 8
7.5
When closing back the module, be
sure that the belt is well positioned
on both pulley, and that the
connector is well plugged.
Tighten screws with a torque of 0.5
Nm.
Do a tilt test (see section
TES1:
) of the
new addressed tilt to check if
everything works well.