Minuit Une IVL PHOTON, Service Manual

Page: 33 / 63

IVL™ Photon Service Manual AA 33
REP7:
ADRESSING MT1-000935 TILT
MODULE
Tools needed:
- TORX T10 screwdriver
Instructions Diagram
7.1
You first need to remove the MT1-
000935 tilt module (see section
REP7:
)
In order to change a tilt module MT1-
000935, you will need to address the
new module correctly
– i.e., if you
change tilt module #1, you will need to
address the new MT1-000935 tilt
module accordingly. Go to step 6B.4.
The number of the MT1-000935 tilt
module is written on the product like
indicated on the diagram.
7.2
Unscrew the 3 screws MT1-002052
using a TORX T10 screwdriver, like
shown in the diagram.
Make sure not to lose the MT1-002052
screws.