32
menu after selecting “Enter password”. For
that, confirm this menu option with OK (10).
Entering the password
Enter the desired number combination (0-9) in
each field using the Up/Down arrow keys, and
using the right/left arrow keys you can control
the individual fields of the number combina-
tion. Once you enter the entire combination,
press the OK button (10) to save. Pressing the
menu button (14) has the same effect as sav-
ing with OK (10). Even here, the password is
accepted and you return to the menu option
“General Settings”.
Deactivating the password
Select the menu option “Password” in the
“Main Menu”, which you can retrieve by
pressing the menu button (14). This is locat-
ed under the second tab “General Settings”.
You can access the submenu by pressing the
OK button (10) or the right arrow key (10).
You can delete your number combination
under “Deactivate” in the submenu. Use the
Up/Down arrow keys (10) to navigate in the
submenu. Press OK (10) to delete your number
combination. You can return to the previous
menu selection by pressing the left arrow key
(10) without changing the password.
Default factory setting
With this, you can restore your DTC 650 set-
tings to factory settings. Go to the “Main
Menu” by pressing the menu button (14) and
select the menu option “Default Settings”.
This is located under the second tab “General
Settings”. Press the OK button (10) or the right
arrow button (10) to access the submenu. You
can select “Yes” or “No” using the Up/Down
arrow keys (10) and confirm with OK (10). Se-
lect “No” to retain the existing settings and
the camera will return to the previous menu
selection. If you choose “Yes”, your DTC 650
shall be restored to the factory settings and
revert to the second tab “General Settings” in
the “Main Menu”.
Camera data
Go to the “Main Menu” by pressing the menu
button (14) and select the menu option “Cam-
era info”. This is located under the second tab
“General Settings”. You can access the sub-
menu by pressing the OK button (10) or the
right arrow key (10). In the submenu, you can
use the Up/Down arrow key (10) and select
from the following data stored in your camera;
Saved files, memory space, firmware version.
Saved files
Go to the submenu on the menu option
“Saved files” and press the OK button (10)
or the right arrow key (10). After that, the
actual number of photo and video files will
be displayed. Confirm using the OK button
(10) or the left arrow key (10) to return to
the Start Menu.
Memory space
Go to the menu option “Memory” in the sub-
menu and press the OK button (10) or the right
arrow key (10). Subsequently, “Used memory
space” and “free memory space” will be in-
dicated. Press the OK button (10) or the left
arrow key (10) to confirm and return to the
Start menu.
Firmware Version
Go to the menu option “Firmware Version”
in the submenu and press the OK button (10)
or the right arrow key (10). You will then be
shown the current Firmware Version. Confirm
with OK (10) or using the left arrow key (10)
to return to the Start menu.
Software updates
If an update is available for your DTC 650,
please proceed as follows:
Make sure your DTC 650 is switched off
(“OFF” function: Main Switch (11), left).
Copy all the files needed for updating to
your PC into the root list of a formatted SD
card. Insert the SD card into your DTC 650 as
Summary of Contents for DTC 650
