30
submenu opens, select between “activate”
and “deactivate” using the Up/Down arrow
keys (10). Confirm your selection with OK (10).
If you select “activate” you have the possibili-
ty of choosing “Switch-on time”, “Switch-off
time“, or “Delayed interval”. Confirm your
selection with OK (10). The switch on and off
time can be programmed using the Up/Down
arrow keys (10) and confirmed with OK (10).
To continue, use the left or right arrow key
(10). In order to save the setting, press the
OK button (10). The camera will automatical-
ly be returned to the Start Menu. Press the
menu button (14) and you can have the same
effect as saving with OK (10). Even here, the
last saved setting will apply and you will be
returned to the Start menu. Using the menu
option “Delayed interval” under the option
“Activate”, you can specify the time period
between the pictures. This period can range
between 10 seconds and 12 hours. By pressing
the OK button (10), the setting will be saved
and the camera will return to the previous
menu selection by pressing the left arrow key
(10) without changing the settings.
The time-lapse function remains inactive if you
select “Deactivate” and confirm that selection
with OK (10).
Note:
DTC 650 will continue to respond to
movement if the time lapse is activated.
General Settings
Language Selection
Please proceed as follows to change the lan-
guage settings on your DTC 650:
1. Bring the main switch (11) in the switch
setting to the “SETUP” mode.
2. You will be immediately directed to
“Manual Control” of the camera,
3. Now press the menu button (14). You will
get to the “Main Menu” of the camera.
4. Then press the arrow key to the right
(10) to change over to the “General Set-
tings”
5. Now press the arrow key (10) pointing
downwards.
6. You are now in the highlighted menu
option “Language”.
7. Press the OK button (10).
8. Using the Up and Down arrow keys (10),
choose the language (highlighted) of
your choice
9. Press the OK button (10).
10. The camera will now have saved the
language you select and you will again
be led to the “Main Menu”.
You will return to the previous menu se-
lection by pressing the left arrow key (10)
without affecting the settings.
Time Stamp
This setting allows you to archive and dis-
play details like date, time, and temperature
as “time stamp”. Go to the “Main Menu”by
pressing the menu button (14) and select the
menu option “time stamp”. It is located under
the second tab “General Settings”. You can
access the submenu by pressing the OK button
(10) or the right arrow key (10), Under this
menu option you can choose between “On”
(Display time stamp) or “Off” (Do not display
the time stamp). Press the OK button (10) to
save the setting and return to the menu option
“General Settings”. You can access the previ-
ous menu option by pressing the left arrow key
(10) without changing the settings.
Date format / Time
(Menu option “Settings”)
This function allows you to set up the display
format for date and time. Go to “Main Menu”
by pressing the menu button (14) and select
the menu option “Settings”. It is located un-
der the second tab “General Settings”. You
can access the submenu by pressing the OK
button (10) or the right arrow key (10). You
can program the settings for date, time, date
Summary of Contents for DTC 650
