31
and time format (12 or 24 hours) using the
Up/Down arrow key (10). Use the left and
right arrow key (10) to access the option you
would like to activate. Press the OK button
(10) to save the settingand you will return to
the menu option “General Settings”. Press the
menu button (14) to have the same effect as
saving with OK (10). Even here, the settings
last saved will be accepted and you will be re-
turned to the menu option “General Settings”.
Note:
Activate the moon phase calendar
by entering precise information. The image
of the moon phase will appear on every
picture or video clip.
Temperature Unit
This function allows you to set either Fahren-
heit or Celsius as the unit of temperature. Go
to the “Main Menu” by pressing the menu
button (14) and select the menu option Tem-
perature Unit”. It is located under the second
tab “General Settings”. You can access the
submenu by pressing the OK button (10) or
the right arrow key (10). Press the Up/Down
arrow key (10) in the submenu to select either
the Celsius or Fahrenheit option. Press the OK
button (10) to save the settings to return to
the menu option “General Settings”.You can
return to the previous menu option without
changing the settings by pressing the left ar-
row key (10).
Power source
Your DTC 650 trail camera is a high precision
device of premium technical quality. It is
strongly recommended that you use premi-
um quality alkaline, lithium or NiMH batteries.
In order to select the battery type, go to the
“Main Menu” by pressing the menu button
(14) and select the menu option “Power
source”. This is located under the second tab
“General settings”. You can access the sub-
menu by pressing the OK button (10) or the
right arrow key (10). Now select your battery
type by choosing between lithium, alkaline
and NiMH batteries by pressing the Up/Down
arrow key (10). In addition, you can select an
external power source. For that, select 6V.
Note:
Choose alkaline if using lithium
batteries.
Press the OK button (10) to save the settings.
The camera will automatically return to the
Start menu. You will return to the previous
menu without any changes to the settings by
pressing the left arrow key (10).
Formatting the memory card
Formatting the memory card will delete all
data on the memory card and will prepare
the memory card for use in the camera. It is
recommended that you format the memory
card before each use. Go to the “Main Menu”
by pressing the menu button (14) and select
the option “Format SD card”. This is located
under the second tab “General Settings”. You
can access the submenu by pressing the OK
button (10) or the right arrow key (10). Select
“Yes” if you would like to format the SD card
or “No” and the memory card will not be
formatted. Press the OK button (10) to save
the settings. The camera will automatically
revert to the Start Menu. By pressing the left
arrow key (10), you will be returned to the
previous menu option and no formatting will
be undertaken.
Password
This function allows you to enter a 4-digit
number combination in order to prevent the
theft of your DTC 650 camera. You will not
be able to access the “SETUP” option (Main
Switch (11) centre) for the camera without
entering the number combination. Go to the
“Main Menu” by pressing the menu button
(14) and select “Password”. This is located
under the second tab “General Settings”. You
can access the submenu by pressing the OK
button (10) or the right arrow key (10). You
can choose a number combination in the sub-
Summary of Contents for DTC 650
