Minox DTC 650, Instructions Manual

Page: 23 / 56

23
Get to know your
MINOX DTC 650
Please take a few moments to read these
guidelines as well as the safety and mainte-
nance instructions. Enjoy your new camera !
- Image resolution: 8 megapixels
- Comfortable 2“ colour display
- High efficiency 60 infrared –
LEDs with back flash
- High shutter speed, under 1s
- Invisible IR camera flash with
over 15 m range
- Low energy consumption
- Continuous shooting range of up to
5 frames/videos of up to 30 s length
- Video resolution: HD 1280x720 or VGA
640x480
- SD-memory card with up to
32 GB memory capacity
- Simple, intuitive handling, 6-key control
panel
- Live-preview and photo/video replay
- Password protection
Parts and Controls
1. IR LEDs with black flash for night shots
2. Twilight sensor
3. Activation LED in blue
4. Camera lens
5. Lock
6. Motion sensor
7. External power supply
8. 2“ LCD color display
9. Slot for memory card
10. Control and input buttons
11. Main switch with three positions
OFF / SETUP / ON
12. External power supply (6V DC)
13. USB cable connection
14. Menu button
15. Battery compartment for
10x1.5 volt AA batteries
16. 2 mounting brackets
17. ¼“ tripod thread
Preparing your camera
Explanation of the controls
Proceed as follows to prepare the camera for
the required use:
1. Place your DTC 650 on a flat surface.
2. Push up the lock (5) on the
right of the camera body.
3. Fold the lock (5) over on the
right hand side.
4. Open the front of the camera to the left.
On the left hand side of the opened camera
body you will see the controls (10, 11, 14) and
on the right hand side you will see the battery
compartment (15).
On the outer edge of the left hand camera
body you will now see the slot for the memo-
ry card (9). In the upper section of the inner
surface there is a 2“ LCD display (8).