© MINOTAIR Ventilation Inc. - www.minotair.com
55
(PENTACARE-V12-OWNER'S MANUAL-2019-Rev-014)
“
H
UMIDITY
”
SETTINGS SCREEN
(
CONT
’
D
)
Figure 51 - Examples of options to adjust shower detector settings, part of HumiWatch365© system.
3.3 Shower Detector Enabled?
o
YES
. The shower detector is operational and will exhaust moisture outside
if the indoor humidity level was equal to or above the setpoint at the time
of detection, or will spread moisture in the house if the indoor humidity
level was below the setpoint upon detection.
NOTE
: Depending on the outside temperature, the quality of your windows
and the amount of water vapor in the air, there may be fogging on the
windows. This is normal and the fog will disappear as the shower detector
exhausts water vapor out of the room.
o
NO
. The detector is not operational.
3.3.1 Sensitivity:
o
NORMAL
. This is the default detection sensitivity in most installations.
There will be detection when there is an actual shower running. It may take
up to 2 minutes before a shower is detected.
o
HIGH
. The detector is much more sensitive. Use this setting if there are
several air returns in your installation having the effect of diluting the
amount of moisture to the point where it becomes difficult to detect an
actual shower running. Note that a high sensitivity may cause false
detections. If so, opt for normal sensitivity.
3.3
3.3.1
