Minolta PI4700E User Manual Download Page 68

Page: 68 / 426

IPP Printing

Pi4700e

3-21

twor

ttin

apte

r 3

3.8

IPP Printing

This section explains how to use the Windows 2000/XP standard IPP
printing function.

Requirements

Computer must have TCP/IP installed and enabled.

Network Card must have valid IP parameters assigned.

Configuration Procedure

Install TCP/IP under Windows 2000/XP.
Refer to the applicable Windows documentation for more information.

Assign the IP parameters.
See “3.2 Specifying the IP Address From the Printer’s Touch Panel”
(p. 3-2) for more information.

Use the procedure below to install the printer.

Installing the printer

For Windows 2000, on the

Start

menu, point to

Settings

and then

click

Printers

For Windows XP, on the

Start

menu, click

Printers and Faxes

For Windows 2000, double-click the

Add Printer

icon to start the Add

Printer Wizard.
For Windows XP, click the

Add Printer

icon to start the Add Printer

Wizard.

Digital Copier

Network Card

IPP

Windows 2000/XP

TCP/IP

IPP Client

Summary of Contents for PI4700E











































































































































































































































































































































































































































Search results

Summary of Contents for PI4700E

Reviews:

Minolta PI4700E, User Manual, Page: 68 / 426

Search results

Summary of Contents for PI4700E

Reviews: