Minolta PI4700E, User Manual, Page: 386 / 426

UNIX Configuration 12
Pi4700e 12-35
A
ppe
ndi
x
Chap
ter
12
5
Type the appropriate Network Card values on the window that ap-
pears.
The following table shows some sample settings.
6
From the three settings at the bottom of the window, select Remote
Printer is on BSD System .
7
Click OK .
8
Ping the Network Card to check the connection.
ping <Network Card IP address>
When ping causes the message shown below to return, it means the
IP address is setup correctly.
<Network Card IP address> is alive.
AS/400
When working with the output queue description (WORKOUTQD), you
must provide information for a number of fields in order to allow the Net-
work Card to function properly as a remote printer device.
1
When prompted for the remote system, type INTNETADR so the AS/
400 system recognizes the device as an IP device.
2
Input an appropriate name (like PORT1 ) for the remote printer queue
name.
3
Connection type must be IP .
4
Internet address must be the Network Card IP address.
5
Destination Type must be OTHER .
6
In response to the message asking if you want to convert SCS to
ASCII, type
YES .
This tells the AS/400 system to convert text.
7
For Manufacturer type and model , specify the printer driver that
comes with the printer controller.
Item Example Input Data Description
Printer Name
myprinter
Name used in the lp command
Remote System Name
fastprint
Network Card host name recorded in /etc/
hosts
Remote printer Name
PORT1
lpd queue name (You can use any name you
want here.)