Minolta PI4700E, User Manual, Page: 407 / 426

12 Setting Up IP Parameters
12-56 Pi4700e
A
ppe
ndi
x
Chap
ter
12
Assigning IP Addresses Using ARP (For UNIX)
1
On a computer associated with the same network segment as the Dig-
ital Copier, log on as root.
2
Type the command shown below.
arp -s <IP address assigned to Network Card> <MAC
address>
Example:
Network Card MAC Address: 00:20:6b:aa:bb:cc
IP Address: 192.9.200.200
arp -s 192.9.200.200 00:20:6b:aa:bb:cc
This stores the MAC address and IP address data in the cache.
3
Next, type the command shown below.
ping <IP address assigned to Network Card>
Example:
IP address assigned to Network Card: 192.9.200.200
ping 192.9.200.200
This command sends the IP address to the Network Card. A timeout
message is returned until the Network Card recognizes this IP address
and restarts.
4
The Network Card waits for auto reset. Otherwise, restart the Digital
Copier.
5
After the Network Card restarts, input the command from step 3 again.
ping <IP address assigned to Network Card>
Example:
IP Address: 192.9.200.200
ping 192.9.200.200
The following response is returned when the IP address is assigned.
192.9.200.200 is alive
6
When assignment is complete, type the command below to delete the
arp cache entry.
arp -d <IP address assigned to Network Card>
Example:
IP Address Assigned to Network Card: 192.9.200.200
arp -d 192.9.200.200