Minolta PI4700E User Manual Download Page 333

Page: 333 / 426

Printer tab

10-8

Pi4700e

geS

ope

Lig

Chap

ter

10.6

Printer tab

The

Printer

tab shows information and settings for printing on the Digital

Copier.

Settings

Sub-menus appear when you click the

Settings

menu on the

Printer

tab.

Click the sub-menus to display screens for changing the printer setup.

Paper Handling

This screen appears when you click the

Paper Handling

sub-menu under

the

Settings

menu. Use this screen to configure the input tray and output

bins.

Input Section

Output Section

Copies

Input a value indicating the number of copies.

Priority Source

Specify the default input tray. The menu shows only the trays
that are currently available for selection.

Bin

Bin names when mail bin manager is installed

Bin Name

Type in the name of the user of each bin. You can input up to 32
characters.

Restore Factory De-
fault Button

Click this button to return settings to their initial factory defaults.

Apply Button

Click this button to apply any settings you have input up to this
point.

Clear Button

Click this button to cancel any settings you have input up to this
point.

Summary of Contents for PI4700E











































































































































































































































































































































































































































Search results

Summary of Contents for PI4700E

Reviews:

Minolta PI4700E, User Manual, Page: 333 / 426

Search results

Summary of Contents for PI4700E

Reviews: