Minolta PI4700E, User Manual, Page: 258 / 426

Macintosh configuration 8
Pi4700e 8-27
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
8.6 Macintosh configuration
This chapter describes how to configure for network printing in a Macin-
tosh environment.
Setting Up AppleTalk
Use the following procedure to make AppleTalk settings.
1
On the Apple menu, point to
Control Panel
and then select
Apple-
Talk .
2
Select Ethernet .
3
Close the AppleTalk dialog box.
Selecting and Setting Up the Printer
You must use the following procedure to configure the driver before print-
ing for the first time.
1
Install the PostScript printer driver and the PPD file for the Digital Copi-
er.
❍
See the documentation that comes with the Digital Copier for infor-
mation about how to install it.
2
Select
Chooser
from the Apple menu.
3
Use the field in the upper left of the dialog box to select the appropriate
printer driver for your Digital Copier.
4
Use the field in the lower left of the dialog box to select the zone where
the Digital Copier is connected.
❍ You do not need to select a zone if your network is configured with-
out using zones.
5
In the printer list on the right side of the dialog box, select your Digital
Copier. The default name of this Digital Copier is MLT_<serial num-
ber>.
6
Click the Create button. (If the dialog box on your screen does not
have a Create button, click the Setup button instead.)