Minolta magicolor 2210 User Manual Download Page 64

Page: 64 / 176

Clearing Media Jams

Pressing the duplex unit cover release,
carefully open the cover.

Remove the jammed media.

Close the duplex unit’s cover.

Close the multipurpose tray.

If there still is a jam message,
press the right-side cover release
button and carefully open the
cover all the way.

Lift the inner paper guide.

Remove the jammed media by pulling it toward you.

If the media came out easily, skip ahead to step 15.

If the media did not come out easily or if you cannot reach the media from
this area, keep the duplex unit’s lower cover open.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for magicolor 2210

















































































































































































Search results

Summary of Contents for magicolor 2210

Reviews:

Related manuals for magicolor 2210

Brands by name

Popular brands

Minolta magicolor 2210, User Manual

Search results

Summary of Contents for magicolor 2210

Reviews:

Related manuals for magicolor 2210

Brands by name

Popular brands