Minolta magicolor 2210 User Manual Download Page 92

Page: 92 / 176

Status, Error, and Service Messages

MAIN UNIT

COVER OPEN

The front, top, or duplex covers
are open and must be closed.

Close the specified
cover(s).

MEDIA JAM

DUPLEX

Media has jammed in the
duplex area or duplex refeed
area on the models with duplex
units installed.

Locate and
remove the jam.

MEDIA JAM

EXIT

Media has jammed between
the print engine and the output
tray.

A media jam has been
detected between the fuser
and output tray rollers located
near the top cover.

Exit jams occur in the media
eject area.

MEDIA JAM

FUSER

Media has jammed leaving the
fuser area.

MEDIA JAM

MAIL BIN

Mail bin jams occur if the
media is jammed in the 5-bin
mailbox on the models with the
5-bin mailbox installed,
between the printer and the
5-bin mailbox, in the mailbox
eject area, or in the mailbox
transport area.

MEDIA JAM MPT

Media has jammed while being
pulled from the specified multi-
purpose tray.

This message...

means...

Do this...

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for magicolor 2210

















































































































































































Search results

Summary of Contents for magicolor 2210

Reviews:

Related manuals for magicolor 2210

Brands by name

Popular brands

Minolta magicolor 2210, User Manual

Search results

Summary of Contents for magicolor 2210

Reviews:

Related manuals for magicolor 2210

Brands by name

Popular brands