background image

Printer Stand/Cabinet 

135

2

Slide the new tray into the 
printer.

5

"

Slightly tilt up the 
tray to insert it into 
the installation rails 
to slide it back in.

For information about loading 
media, see “Using Media,”  on 
page 33.

Printer Stand/Cabinet 

A tabletop- or floor-model printer stand or a cabinet is available.  Follow the 
assembly instructions included with it. 

SC-210 Convenience Copier

You can expand your magicolor

 

2210’s functionality by connecting an SC-210 

digital color convenience copier option to the standard parallel port on the 
printer (interface set to “non-interactive”). The SC-210 supports up to 
legal-size paper. An optional 25-sheet Automatic Document Feeder (ADF) is 
available. 

Check the documentation included with your SC-210 for instructions on 
setup, configuration, and operation.

Included with the SC-210:

Software CD-ROM

Parallel cable (2)

Power adapter

User warranty and registration card

Time-of-Day Clock 

The time-of-day clock provides time and date information on the startup page 
and in the accounting data.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for magicolor 2210

















































































































































































Reviews: