Minolta EP2050, Operator'S Manual

Page: 97 / 225

Panel Display in 2-Sided Copying
1136P201AA
▲
The copier starts a 2-sided copying
cycle when you select a mode to
make 2-sided copies (i.e., 1 2 or
2 2) and press the Start Key.
On completing the first copy cycle,
the copier stores the 1-sided copy in
the Duplex Unit, getting ready to run
the second copy cycle.
At this time, one of the Paper Source
Indicators (for convenience, we will
call it the 2-Sided Copy Indicator)
lights up to indicate that one or more
copies have been stored in the Duplex
Unit.
▲
Canceling 2-Sided Copying
When the copier has completed the first copy cycle of a 2-sided copying cycle,
there are one or more 1-sided copies stored in the Duplex Unit.
If you want to cancel the 2-sided copying mode at this point, these 1-sided copies
must be fed out of the Duplex Unit and copier onto the Copy Tray.
1136P5
P r e s s t h e S t a r t
K e y t o e j e c t a l l
t h e c o p i e s a t :
1136P543CA
Press the Panel Reset Key.
◆
The message on the Message
Display changes to one shown
on the left.
Feeding 1-Sided Copy Out of Copier
1
1139O2360A
Press the Start Key.
◆
This feeds any copies in the
Duplex Unit out onto the Exit
Tray.
Then, the 2-Sided Copy
Indicator goes out, indicating
that the copier is no longer in
the 2-sided copying mode.
2
4. System Job Setting
Ch
a
p
te
r 3
M
aki
ng
C
o
pie
s
85