Minolta EP2050 Operator'S Manual Download Page 100

Page: 100 / 225

Example: Making 3 copy sets of a 30-page original set using a 10-Bin Sorter

Sorter or Staple
Sorter

•

Top three Bins
contain 25 sorted
copies.

•

The 6th to 8th Bins
contain 5 sorted
copies.

30-Page
Original Set

Sorting into
3 Sets

1139O1140A

4. System Job Setting

The descriptions on this and the following pages is that for the S-205 and
ST-206.
The numbers marked with

∗

are for the S-104 and ST-101.

NOTE

Auto Dual Function in the Sort Mode

When 10 (

∗

5) or less copies are made from an original set consisting of more

than 50 (

∗

25) originals in the Sort Mode, the Sorter or Staple Sorter is

automatically switched into the Auto Dual Function Mode using the 11th (

∗

6th)

to 20th (

∗

10th) Bins.

Copies

Bins in Use

1st to 50th (

∗

25th) sorted copies

Top or 1st to 10th (

∗

5th) Bins

51st (

∗

26th) to 100th (

∗

50th) sorted copies 11th (

∗

6th) to 20th (

∗

10th) Bins

If the number of copies selected exceeds 10 (

∗

5), the new copy cycle stops at

the 50th (

∗

25th) original.

Auto Dual Function

Each of the Sorter Bins holds up to 50 (

∗

25) sheets of paper. However, the

Auto Dual Function allows sorting of copies of up to 100 (

∗

50) originals

under certain conditions.

To have a complete set of copies from the originals.

Place the copies from the 6th Bin on top of those from the Top Bin. In the same
way, place the copies from the 7th Bin on top of those from the 2nd Bin, and so
on.

r 3

aki

pie

Summary of Contents for EP2050


































































































































































































































Search results

Summary of Contents for EP2050

Reviews:

Brands by name

Popular brands

Minolta EP2050, Operator'S Manual

Search results

Summary of Contents for EP2050

Reviews:

Brands by name

Popular brands