– 73 –
DIGITAL ROC/GEM
8.
Repeat steps 5 to 7 if necessary and
specify the Digital GEM adjust value
so that an appropriate correction
result can be obtained.
9.
Click on
.
• The image that the film grain is corrected
according to the specified value (Digital
GEM adjust value) will be scanned.
• For the operations after performing the final
scan, see page 86.
• When scanning a B&W film, the Digital GEM function is not available.
• When using the Digital GEM function, be sure and perform the prescan and adjust a focus with
the Point AF or Manual Focus function (p.40 to 41) before the final scan. Putting a checkmark
on [Auto Focus at Scan] in the Preferences will be recommended.
• The Digital GEM function may not be obtained effectively depending on the conditions of the
film.
• A much more time is required for scanning when the Digital GEM function is turned on
compared with when that function is turned off.
Summary of Contents for Dimage Scan Multi2
Page 1: ...1...
Page 107: ...Software Instruction Manual Software Instruction Manual...
