manualshive.com logo in svg

Minolta DiMAGE Scan Multi PRO AF-5000, Instruction Manual

Share
Download
Minolta DiMAGE Scan Multi PRO AF-5000 Instruction Manual Download Page 87

DiMAGE Scan Multi PRO

87

1.

Click on 

in the main window.

• The Digital ICE function is turned on. When the preview

scan and final scan are performed, the image on which
the visible dust, flaw, fingerprint, mold, etc. have been
removed is displayed. However, this function has no
effect when scanning a monochrome film.

•  When scanning a B&W film, the Digital ICE function is

not available.

• When the Digital ICE function is turned on, the scanning

time will be longer.

• Kodak Kodachrome cannot be used.
• You can use the Digital ICE function for the following

types of B&W film only after the film has been
developed in color and scanned with the “Color
Negative” setting for the film type. We cannot assure this
procedure for other types of film.
Kodak

Select Black & White 400

Kodak

T400CN

Illford

XP2 Super

DIGITAL ICE

The Digital ICE (Image Correction Enhancement) function removes the visible dust, flaw,
fingerprint, mold, etc. from the surface of the image.

Digital ICE

3TM

, Digital ICE

TM

, Digital ROC

TM

, and Digital

GEM

TM

are trademarks of registered trademarks and

techenolgies of Applied Science Fiction,Inc in U. S. A.

Summary of Contents for DiMAGE Scan Multi PRO AF-5000



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands