manualshive.com logo in svg

Minolta DiMAGE Scan Multi PRO AF-5000, Instruction Manual

Share
Download
Minolta DiMAGE Scan Multi PRO AF-5000 Instruction Manual Download Page 10

10

SYSTEM REQUIREMENTS — PC / AT

CPU:

Operating System:

Memory:

Monitor:

Applications:

Pentium 166MHz 

or later processor (or better).

Windows

®

Me, 

Windows

®

2000 Professional 

A minimum of 96 MB application RAM in addition to the
requirements for the OS and Adobe Photoshop™.

256 MB or more when scanning with 16 bit output or using the Digital
ICE/ROC /GEM functions.

(512 MB or more is recommended.)

1024 x 768 pixels is recommended. 

640 x 480 can be used.

High Color(16bit)

TWAIN driver is compatible with Photoshop Ver.4.0.1,
Ver.5.0.2, Ver.5.5 and Ver.6.0.
Photoshop 5.0LE

Interface:

Hard Disk Space:

About 2 GB or more of available hard disk space.
About 6 GB or more of available hard disk space when
scanning with 16 bit output or using the Digital ICE/ROC/GEM
functions. (8 GB or more is recommended.)

Recommended
Board:

Adaptec: SCSI CARD 19160, 

SCSI CARD 29160, 
SCSI CARD 29160N

Adaptec Fireconnect 4300 

PROCOMP SpeedDemon 400P
• OHCI compatible IEEE 1394

port (*3) as standard interface.

SCSI IEEE 

1394

Support cannot be provided for custom or home built machines.(*1*2)
Pentium III processor is recommended when scanning with 16 bit
output or using the Digital ICE/ROC/GEM functions.

Pentium II 

or later processor (or better).

Windows

®

98, 

Windows

®

98 Second Edition,

Windows

®

Me, 

Windows

®

2000 Professional 

Windows NT

®

4.0

*1

Only for PCs with pre-installed operating systems.

*2

Excludes notebook PCs.

*3

Non-DV-dedicated IEEE port guaranteed by PC manufacturers.

Summary of Contents for DiMAGE Scan Multi PRO AF-5000



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands