Minolta DI750 - SERVICE, Service Manual

Page: 84 / 279

1 - 63
36 ADJUSTMENT
1 ADJUSTMENT
2 Printer Resist Loop Adjustment
Adjusting the printer resist loop amount for trays
(tray 1, 2, 3), manual feed tray, and ADU.
Step Operation
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press
2
Image adjustment.
3 [Image Adjustment Menu Screen]
Press
3
Timing adjustment.
4 [Timing Adjustment Menu Screen]
Press
2
Paper resist loop adjustment
5 [Printer Resist Loop Adjustment
Screen]
Press the
NEXT ITEM
or
PREVIOUS ITEM
key to select the item to be adjusted.
The screen changes from Tray to Manual
tray to ADU.
6 Press the
COPY SCREEN
key.
7 Press the Start button to make a copy.
8 Check the paper feed loop amount.
9 If the printer registration loop amount is
not appropriate, press the C button while
pressing the Utility button.
10 [Printer Resist Loop Adjustment
Screen]
Enter a value with the numeric keys and
press the
SET
key.
• Tray (tray 1, 2, 3)
Setting range: -5 to +5
1 step= 2 ms
• Manual feed tray
Setting range: -10 to +10
1 step= 2 ms
• ADU
Setting range: -10 to +10
1 step= 2 ms
11 Repeat steps 5 to 10 until the printer reg-
istration loop amount is appropriate.
12 Press the
PREVIOUS SCREEN
key to re-
turn to the Timing Adjustment Menu
Screen.
3. Printer Pre-resist Adjustment
Adjusting the pre-resist for tray 1, tray 2, tray 3,
tray 4 (LCT), and ADU.
Step Operation
1 Enter the 36 mode.
2 [36 Mode Menu Screen]
Press
2
Image adjustment.
3 [Image Adjustment Menu Screen]
Press
3
Timing adjustment.
4 [Timing Adjustment Menu Screen]
Press
3
Printer Pre-resist adjustment
5 [Printer Pre-resist Adjustment
Screen]
Press the
NEXT ITEM
or
PREVIOUS ITEM
key to select the item to be adjusted.
The screen changes from Tray 1 to Tray
2 to Tray 3 to Tray 4 (LCT) to ADU.
6 Press the
COPY SCREEN
key.
7 Press the Start button to make a copy.
8 Check the printer pre-registration.
9 If the printer pre-registration is not ap-
propriate, press the C button while
pressing the Utility button.
10 [Printer Pre-resist Adjustment
Screen]
Enter a value with the numeric keys and
press the
SET
key.
• Tray 1, 2, 3, 4 (LCT)
Setting range: -5 to +5
1 step= 2 ms
• ADU
Setting range: -10 to +10
1 step= 2 ms
11 Repeat steps 5 to 10 until the printer pre-
registration is appropriate.
12 Press the
PREVIOUS SCREEN
key to re-
turn to the Timing Adjustment Menu
Screen.
Di750Ver.3field017e.p65 01/07/18, 17:43 63