Minolta DI750 - SERVICE Service Manual Download Page 123

Page: 123 / 279

1 - 102

OTHER ADJUSTMENT

1 ADJUSTMENT

Adjustment Method

Step

Operation

To remove the tray with the up/down plate
up, set the tray with a small thing (eraser,
etc.) inserted under the up/down drive
linkage lever.

Make sure that the up/down plate has
moved up by hearing the motor sound,
then draw out the tray.

Remove the two screws to remove the
tray from the left and right guide rails.

Loosen a screw and adjust the position
of the up/down pulley so that the front
and rear ends of the up/down plate are at
the same height.

Secure the up/down pulley by tightening
the screw firmly.

Secure the tray on the guide rails.

Set the tray.

Eraser or the like

Up/down dive linkage
lever

LCT Up/Down Plate Horizontality Adjust-
ment

Up/down plate

Screws

Up/down pulley

Adjusting
screws

Screws

Up/down pulley

Up/down plate

Di750Ver.3field01de.p65

01/07/18, 18:28

102

Summary of Contents for DI750 - SERVICE
























































































































































































































































































Search results

Summary of Contents for DI750 - SERVICE

Reviews:

Brands by name

Popular brands

Minolta DI750 - SERVICE, Service Manual

Search results

Summary of Contents for DI750 - SERVICE

Reviews:

Brands by name

Popular brands