Minolta DI450 Operator'S Manual Download Page 63

Page: 63 / 234

3-20

Mak

pies

Chapter

5. Selecting the Finishing

When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you
to set a particular finishing function.

Finishing Functions

4003P541EA

4002O055AA

Non-Sort

• All copies are fed out without being sorted,

grouped, stapled or punched.

• Touch [Non-Sort].

NOTE
Thick paper and OHP transparencies cannot be
used for making copies in Staple, Punch and/or
Folding.

Orig.

Copy

4002O056AA

Sort

• This function is effective when making multiple

copies from multiple originals. Copies are
sorted into complete sets of the originals.

• Touch [Sort].

Orig.

Copy

4002O057AA

Group

• The copies made from each original are

separated into groups. Each group contains the
same number of copies.

• Touch [Group].

Orig.

Copy

Summary of Contents for DI450











































































































































































































































Search results

Summary of Contents for DI450

Reviews:

Minolta DI450, Operator'S Manual, Page: 63 / 234

Search results

Summary of Contents for DI450

Reviews: