Minolta DI450, Operator'S Manual, Page: 111 / 234

3-68
Mak
in
g
C
o
pies
Chapter
3
10. Selecting the Job Functions
Memory Recall
Touching [Memory Recall] on the Touch Panel after a copy cycle has been completed will allow you to
make a copy using the previous image data and copying mode without having to reload the original.
Touch [Memory Recall].
Press the Start key, and the machine starts
the print cycle.
NOTES
• Memory Recall available from User’s Choice
must be turned ON to use this function.
☞
p.5-13
• This function cannot be used in the Interrupt
mode.
• The preceding image data and copy settings are
cleared to disable Memory Recall when any of
the following operations is performed.
•The machine is turned OFF.
•The machine scans a new original or the Start
key is pressed.
•The Access key or Interrupt key is pressed, or
[Reserve] is touched.
•The Clear key or Panel Reset key is pressed
while the machine remains idle.
Useful Tips
• After you have made copies from a confidential
document, it is recommended that you press the
Panel Reset key to erase the data.
• To change the number of copies to be made,
press the Clear key and set the new number.
• The paper size and paper direction cannot be
changed.
Setting Memory Recall
1
4003P120CA
2
4003P121CA