Minolta DI450 Operator'S Manual Download Page 6

Page: 6 / 234

P-3

WARNING

Do not place a flower vase or other container that contains water, or metal clips or

other small metallic objects on this product. Spilled water or metallic objects

dropped inside the product could result in a fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter get inside the

product, immediately turn OFF the power switch, unplug the power cord from the

power outlet, and then call your authorized service representative.

• If this product becomes inordinately hot or emits smoke, or unusual odor or noise,

immediately turn OFF the power switch, unplug the power cord from the power

outlet, and then call your authorized service representative. If you keep on using it

as is, a fire or electrical shock could result.

• If this product has been dropped or its cover damaged, immediately turn OFF the

power switch, unplug the power cord from the power outlet, and then call your

authorized service representative. If you keep on using it as is, a fire or electrical

shock could result.

Do not throw the toner cartridge or toner into an open flame. The hot toner may

scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a grounding

terminal.

Summary of Contents for DI450











































































































































































































































Search results

Summary of Contents for DI450

Reviews:

Minolta DI450, Operator'S Manual, Page: 6 / 234

Search results

Summary of Contents for DI450

Reviews: