Minolta DI450, Operator'S Manual, Page: 156 / 234

5-15
4. User’s Choice
Usin
g
the
Ut
ility
Mo
d
e
Chapter
5
[3/6]
Select whether to enable (“ON”) a copy cycle or
not (“OFF”) when it is initiated by pressing the
Start key with no originals placed on the Original
Glass or with an original smaller than the
detectable size placed on the glass in the Auto
Paper mode.
If this function is turned “ON,” the copy cycle is
run using the paper loaded in the default paper
source. If turned “OFF,” a warning message
appears to instruct the user to select the paper.
<For United States and Canada Users>
The initial setting is “ON.”
<Except United States and Canada Users>
The initial setting is “OFF.”
Select the default copying order in the 4-in-1 mode
from among the following two:
The initial setting is “ ”
Select the format for date printing, i.e.,
“punctuation,” “year,” and “date format.”
• “Punctuation” can be either “XX/XX/XX” or
“XX.XX.XX.”
The initial setting is “XX/XX/XX.”
• “Year” can be either “’yy” or “yyyy.”
The initial setting is “’yy.”
• “Date Format” can be either “’00/12/27,” “12/
27/’00,” “DEC/27/’00,” “27/12/’00,” or “27/
DEC/’00.”
The initial setting is “’00/12/27.”
Enter the position at which to print the date by X
and Y using [
▼
] or [
▲
]. The dimension can range
from 3/16 to 1-9/16.
The initial setting is “X: 1/4, Y: 3/4.”
Enter the position at which to print the page
number using [
▼
] or [
▲
]. It can range from 3/16
to 1-9/16 from the bottom of the page.
The initial setting is “1/4.”
[4/6]
Select whether to turn “ON” or “OFF” the beep
that sounds each time a key on the Touch Panel is
touched.
The initial setting is “ON.”
“Small” Originals
4in1 Copy Order
Date Printing Format
1 2
3 4
1 3
2 4
1 2
3 4
Date Printing Position
Page Number Position
Confirmation Beep