Minolta Di181 Manual Download Page 82

Page: 82 / 116

Troubleshooting

6-6

Rev. /

6.3

If Your Copier Is Not Working Correctly . . .

If any other technical problems should occur:

Turn the copier off,

Remove the power plug from the outlet, and

Call your Technical Representative.

Symptom

Possible cause

Action

Nothing appears in the
Display Panel.

The Energy Saver Mode is
active.

Press any key to cancel the
Energy Saver Mode.

The copier is turned OFF.

Turn ON the Power Switch.

The copy cycle does not start
when the [START] key is
pressed.

The copier was just turned
ON.

Wait about 60 seconds. The
copier is warming up.

The copier has developed a
malfunction.

Please read the message on
the Display Panel.

The copier is not activated
when the Power Switch is
turned ON.

The power cord is unplugged
from the power outlet.

Plug the power cord into the
power outlet.

The room circuit breaker is
open.

Close the room circuit
breaker.

Summary of Contents for Di181





















































































































Search results

Summary of Contents for Di181

Reviews:

Related manuals for Di181

Brands by name

Popular brands

Minolta Di181, Manual

Search results

Summary of Contents for Di181

Reviews:

Related manuals for Di181

Brands by name

Popular brands