Initial Steps . . .
3
Rev. /
3-17
3.10
Using the Multi Bypass Tray
You can make copies on OHP transparencies, translucent and other
special types of paper using the Multi Bypass Tray.
1
Place the original on the Original
Glass and enter the desired mode
settings.
2
Swing down the Multi Bypass Tray.
?
Are you using a large paper
size?
Ü
Slide out the Multi Bypass Tray
Extender.
3
Load a stack of copy paper onto the
Tray and insert it until it stops. The
side to be printed must be face up.
m
Up to 50 sheets of plain paper
m
Up to 20 sheets of other types of
paper
m
Up to 5 OHP transparency
sheets
4
Ensure that the maximum paper
filling height is not exceeded (see
the Max. Level Indicator on the Multi
Bypass Tray).
Which originals can be used with the
feeder?
Which functions are not available?
• Types of Paper:
Plain paper (60 g/m
2
to 90 g/m
2
)
Thick paper (91 g/m
2
to 157 g/m
2
)
OHP transparencies and translucent
paper
• Paper Sizes:
max. 297 × 432 mm
min. 100 × 140 mm
• 2in1 Mode
• Auto Paper Mode
• Auto Size Mode
Summary of Contents for Di181
Page 100: ...6 Troubleshooting 6 24 Rev ...