Minolta Di181 Manual Download Page 19

Page: 19 / 116

Getting to Know Your Copier

Rev. /

2-9

2.3

Transporting the Copier

If you need to transport the copier, please consult your Technical
Representative.

2.4

Setting Up the Copier

Environmental Requirements

The optimal environmental requirements of the copier are as follows.

Temperature from 10°C to 30°C (50°F to 86°F)
(maximum fluctuation of 10°C (18°F) per hour)

Humidity of 15% to 85%
(maximum fluctuation of 20% per hour).

Installation Site

The installation site must meet the following requirements:

An area which is dry and free of dust

A level surface free of undue vibrations

Provision for good ventilation

A location away from curtains or other easily-inflammable materials.

The unit must be protected from the following influences:

Splashing liquids

Direct sunlight

Strong temperature fluctuations

Direct air flow from heating or air conditioning units.

Summary of Contents for Di181





















































































































Search results

Summary of Contents for Di181

Reviews:

Related manuals for Di181

Brands by name

Popular brands

Minolta Di181, Manual

Search results

Summary of Contents for Di181

Reviews:

Related manuals for Di181

Brands by name

Popular brands