Minolta Di181, Manual

Page: 16 / 116

2 Getting to Know Your Copier
2-6 Rev. /
Ü
Always make sure that the power plug is correctly inserted in the
socket and that the socket is visible and accessible at all times.
Ü
To prevent damage to the power cable, do not pull on the cable itself
when unplugging the copier. This could result in a fire or cause an
electrical shock.
Ü
Do not move the copier unless it has been unplugged to avoid damage
to the power cable. This could result in a fire or short circuit.
Ü
To prevent damage to the power cable, never place heavy objects on
it, or pull or bend it. This could result in a fire or cause an electrical
shock.
Ü
Ensure that the copier is not standing on the cables of any other
electrical equipment. This may result in a fire or the malfunction of the
affected equipment.
Ü
Ensure that the cables of other electrical devices are not trapped or
pinched by the copier. This may result in a fire or the malfunction of the
affected equipment.
Ü
Ensure that the power supply has the correct voltage for the copier.
Incorrect voltage could result in a fire or cause an electrical shock.
Ü
Never connect the copier to a multiple-socket extension cord. This
could result in a fire or cause an electrical shock.
Ü
Switch the copier off immediately, unplug the power cable and contact
your Technical Representative if the power cable is damaged.
Incorrect voltage could result in a fire or cause an electrical shock.
Ü
If an extension cable is needed, use one with a capacity that
corresponds to or exceeds the power consumption of the copier.
Extension cables of an insufficient capacity can lead to overheating or
fires.
Ü
Always unplug the power cord immediately if anything unusual occurs
while the copier is running.
CAUTION
A negligible amount of ozone is generated during normal operation
of this copier.
While this is not a health hazard, it may result in an unpleasant odor. It is
recommended that the room be well ventilated.
Ü
Locate the copier in a well-ventilated room.