Entering data
3
Di151 Fax Unit
3-1
3
Entering data
3.1
Preparation
Before you can operate all the functions on your fax machine, you must
enter several settings. This chapter explains how to set your name, your
line type and the remote locations with which you may wish to
communicate.
You can cancel the setting at any time by pressing [NO] or [RESET]. The
setting will then not be saved. If you do not press any key within 30
seconds your fax machine will return to standby mode.
3.2
Typing Conventions in this Manual
If nothing else is requested, all keys are to be pressed one after the other.
This is also the case if they are connected by a "to facilitate the
layout."Press [0] + [5] + [YES]" means: Press the numeric key [0], then the
numeric key [5] and then the key labelled [YES].
3.3
Enter text
You can use the one-touch keys to enter characters. To enter special
characters, follow the instructions given in the table below. Press [YES] to
save the relevant setting. To add a space, press [SPACE]. If you have
made a mistake, press the [DELETE] key to correct the mistake. Press the
right or left arrow key (AUTO/PHOTO) to move the cursor whilst entering
letters and special characters.
Summary of Contents for Di151f
