Minolta CL-200, Instruction Manual

Page: 3 / 56

1
SAFETY PRECAUTIONS
• To ensure correct use of this instrument, read the following points carefully and adhere
to them. After you have read this manual, keep it in a safe place where it can be referred
to anytime a question arises.
WARNING
(Failure to adhere to the following points may result in death or serious injury.)
Do not use the instrument in places
where flammable or combustible
gases (gasoline fumes etc.) are
present. Doing so may cause a fire.
Always use the AC adapter supplied
as a optional accessory, and connect
it to an AC outlet of the rated voltage
and frequency. Using a non-specified
AC adapter or connecting it to an in-
correct AC outlet may damage the in-
strument or AC adapter, causing a fire
or electric shock.
If the instrument will not be used for a
long time, disconnect the AC adapter
from the AC outlet. Accumulated dirt
or water on the prongs of the AC power
cord’s plug may cause a fire and
should be removed.
Do not disassemble or modify the in-
strument. Doing so may cause a fire
or electric shock.
Take special care not to allow liquid or
metal objects to enter the instrument.
Doing so may cause a fire or electric
shock. Should liquid or metal objects
enter the instrument, turn the power
OFF immediately, remove the batter-
ies (or disconnect the AC adapter from
the AC outlet), and contact the near-
est Minolta-authorized service facility.
The instrument should not be operated
if it is damaged or AC adapter is dam-
aged, or if smoke or odd smells occur.
Doing so may result in a fire. In such
situations, turn the power OFF imme-
diately, remove the batteries (or dis-
connect the AC adapter from the AC
outlet), and contact the nearest
Minolta-authorized service facility.
Do not put the batteries on a fire,
charge them (if they are not charge-
able), short-circuit them, heat them or
disassemble them. Doing so may
cause an explosion or heat generation,
resulting in fire or injury.
Do not use batteries other than those specified by MINOLTA. When installing batter-
ies in the instrument, make sure that they are correctly oriented according to the (+)
and (-) marks. Also make sure not to mix new and old batteries, or mix batteries of
different types. Failure to adhere to these instructions may cause batteries to ex-
plode or leakage of electrolyte, resulting in fire, injury or air pollution.
The socket-outlet shall be installed near the machine and shall be easily accessible.
CAUTION
(Falling to adhere to the following points may result in injury or damage to the
instrument or other property.)