Minolta CL-200, Instruction Manual

Page: 35 / 56

33
Connecting the CHROMA METER to a Computer (Digital
Output)
You can connect the CHROMA METER to a personal computer using the (optional) T-A11
connection cable. You can then transfer the measurement data to the computer, and use the
computer to store and manage the data.
If you install Minolta’s optional CL-S1w data processing software on your computer, you will
also be able to use the computer to view measurement results in real time and to control
multi-point measurements. The software also makes it possible to use CF correction with
MULTI calibration mode, a feature that is not available on the CHROMA METER alone. For
information about how to use the CL-S1w software, read the program’s online help.
●
Connection of the T-A11 cable increases the CHROMA METER’s consumed current by
about 50%. When you have finished using the computer connection, please disconnect
the cable.
●
When you change the measurement mode (measurement parameters), the printer skips a
line, then prints the new parameter names, and then prints out the values.
●
For repeated measurements in the same mode, the printer prints only the values (the
parameter headings appear only once, at the top).