MINOLTA-QMS PagePro 4100GN, User Manual

Page: 33 / 189

2 Unpacking, installing and setting up the printer
2-16 PagePro 4100GN
Connecting the printer to a network (network interface)
1
Make sure that the printer is turned off.
2
Connect the network interface cable to the network interface port on
the back of the printer.
3
Turn on the printer.
The next step that you should perform depends on the type of connection
to your printer and your network environment type as noted below. See
online manual for more information.
G
Peer-to-peer printing using TCP/IP.
G Peer-to-peer printing using IPX/SPX.
G
Printing with AppleTalk.
G Printing via a NetWare print server.
CAUTION
Using the wrong type of cable may result in damage to the
equipment!
Using the wrong type of cable may damage the socket on the printer.
➜ Only use an IEEE 1284 type B shielded interface cable for connecting
the printer to your computer.
➜ Minolta/QMS does not warrant the use of any particular cable. The
user assumes all responsibility as to the quality and performance of
the cable.
Before continuing to the next step, you should first install the printer driver
on the computer that you will be using for printing.