MINOLTA-QMS MAGICOLOR 6110, Installation Manual

Page: 7 / 52

Getting Acquainted with Your Printer
7
or vapors (such as ammonia), water pipes, refrigerators, and
any strong electromagnetic field (such as that created by an air
conditioner).
If the printer is located in a cold room that is rapidly heated, or if the
printer is moved from a cold place to a warm, humid place, condensa-
tion may occur within the printer, degrading print quality. If this occurs,
allow the printer to adapt to the environment for about one hour
before use.
„
Away from open flames or items that can easily burn.
„
Away from water.
If using a humidifier or water vaporizer in the room with the printer, use
only purified or distilled water. Impurities in the water may be released
into the air, where they can accumulate inside the printer and cause
degraded printer output.
„
Away from items that produce excessive vibration.
„
At an altitude of 0–8202' (0–2500 m).
„
Near your computer—6.5' (2 m) or less for an IEEE 1284 bidirectional
parallel connection; cables for other connections may be longer.
„
Close to an easily accessible grounded power supply on an exclusively
dedicated power outlet.
Attention
Do not connect the groundwire to gas or water pipes or grounding
for telephones.
„
Not connected to the same electrical outlet as noise-generating equip-
ment. If the printer is connected to the same circuit used by other
high-current machines, such as a copier or air conditioner, or to an
electrically noisy machine, low voltage or noise may cause overheat-
ing, computing errors resulting in data loss, and improper performance.
„
In a well-ventilated area, but away from wind.
„
With enough space to allow adequate ventilation and easy servicing.
WARNING!
Obstructing the ventilation grilles could present a fire hazard.