MINOLTA-QMS MAGICOLOR 6110 Page 33 Installation Manual Download

Page: 33 / 52

Installing Printer Drivers and Software

When the installation application window appears, select

Install

Printer Utility and Driver

, and then follow the on-screen

instructions to install the printer driver and Crown Port Monitor.

Installing Windows Drivers and Utilities via an Ethernet
TCP/IP Interface Configuration

Detailed instructions for configuring TCP/IP can be found in the CrownBook
(in PDF format on the Software Utilities CD-ROM).

DHCP Installation

If you use DHCP to install TCP/IP, you must enable DHCP/WINS
in Administration/Communications/Resident NIC/CrownNet/TCPIP
printer configuration menu. See your network administrator and
your CrownBook for further information.

Manual TCP/IP Installation

Connect your printer to the network with an Ethernet cable.

If necessary, in the Administration/Communications/Resident NIC/
CrownNet/TCPIP/Internet Address menu, enter the printer’s Internet
address.

The factory default Internet address is 161.33.128.24. If necessary,
in the Administration/Communications/Resident NIC/CrownNet/

Summary of Contents for MAGICOLOR 6110





















































Search results

Summary of Contents for MAGICOLOR 6110

Reviews:

Related manuals for MAGICOLOR 6110

Brands by name

Popular brands

MINOLTA-QMS MAGICOLOR 6110, Installation Manual

Search results

Summary of Contents for MAGICOLOR 6110

Reviews:

Related manuals for MAGICOLOR 6110

Brands by name

Popular brands