Getting Acquainted with Your Printer
6
Location Requirements
„
On a hard, flat, level (1.5° or less slant at any point around the
machine) surface capable of supporting the printer, accessories, con-
sumables, and media. Weights are shown below.
5
"
A surface can be tested for levelness with a standard round
pencil. If the pencil rolls, the surface is not level. Clear the area
of any obstruction or items such as cables that might prevent
the printer from sitting directly on the flat, level surface.
„
In an area with an ambient temperature range of 50°–95° F (10°–
35° C) and relative humidity range of 20%–80% (noncondensating).
„
Away from cooling and heating sources, extreme temperature or
humidity changes, direct sunlight, excessive dust, corrosive chemicals
Top View
Component
Weight
Printer
101 lbs (46 kg)
Consumables (such as toner,
OPC belt)
11 lbs (5.0 kg) (total)
Media
5.2 lbs (1.9 kg) per ream of 20 lb
bond (75 g/m
2
) paper
Lower feeder unit (each)
14.8 lbs (6.7 kg)
Duplex unit
5.3 lbs (2.4 kg)
015mati.eps
28 inches
(70 cm)
8 inches
(20 cm)
20 inches
(50 cm)
Fro
n
t
4 inches
(10 cm)
Summary of Contents for MAGICOLOR 6110
Page 1: ...magicolor 6110 Installation Guide 1800645 001A ...
Page 52: ......
