Installing Printer Drivers and Software
35
1
From the Start menu,
choose Settings.
2
Choose Printers.
3
In the Printers window
click the right mouse but-
ton on the magicolor 6110
printer to display the
printer’s menu.
4
Choose Properties.
5
Choose the Details tab
(Windows Me/98/95) or
Ports tab (Windows 2000/
NT4).
6
From the Print To The Fol-
lowing Port list, choose the
Crown port that was added during the Crown Print Monitor
installation.
7
Choose OK to close the Printer Properties window.
8
Close the Printers window.
5
"
For additional information about the Crown Print Monitor, see the
Crown Print Monitor Administrator’s Guide (in PDF format on the
Software Utilities CD-ROM). For information about the print
monitor that comes with Microsoft Windows 2000, see your
Windows documentation.
Installing Macintosh Drivers and Utilities
EtherTalk Interface Configuration
You can configure your MINOLTA-QMS print system by several different
methods.
This section briefly describes the configuration procedure for the printer
interface. You can make these configuration changes through any of the
following means:
„
Printer control panel
„
Print Utility for Macintosh
„
Remote Console
„
CrownView
When your printer boots up, it will find a default zone. If your network has
more than one zone, use the Administration/Communications/Resident NIC/
CrownNet/EtherTalk/Zone Name/Zone Part 1 and Zone Part 2 menus to enter
Summary of Contents for MAGICOLOR 6110
Page 1: ...magicolor 6110 Installation Guide 1800645 001A ...
Page 52: ......