Minnich A-1-24, Operators & Service Manual

Page: 10 / 28

Dowel Drill Manual
10
GENERAL SPECS
Pneumatic Connection:
• Approved air disconnect is required to be installed in accordance to Local and National Codes.
Environmental:
• +5°C to +40°C (+41°F to +104°F)
• 50% Rh at +40°C (+104°F), (90% Rh at +20°C (+68°F))
• Altitude – 1000m (3280ft) above mean sea level
• Unit is to be disposed according to all Local and National Regulations
Transportation and Storage:
• -25°C to +55°C for 24 hours (-13°F to +131°F)
Ingress Protection:
• Protection level IP2X is provided
Sound:
• System operates at sound levels about 85dBA and 85dBC. Hearing protection is required.
Pneumatic hammer:
• DO NOT force tool. Use the correct toll for your application.
• DO NOT use the machine if valve handles do not turn drill on/off.
• DO NOT make any adjustment while air is hooked up to the machine.
Operation of machine:
• DO NOT overreach, keep proper footing and balance at all times.
• DO NOT wear loose clothing, or jewelry. Tie up long hair.
• DO NOT use the machine if maintenance is required.
Transportation, service and Storage:
• DO NOT use your hands to search for air leaks
• DO NOT service the machine unless you are qualified
• KEEP OIL resivoir filled - run drill frequently to keep the system lubricated.