Minnich A-1-24, Operators & Service Manual

Page: 25 / 28

25
Dowel Drill Manual
HAMMER PARTS MANUAL
Always disconnect the air supply before
changing steel or dismantling the tool for
service or repair.
For maximum safety we advise the installa-
tion of a shut-off valve at the end of the air
line.
Net Weight 14.5lbs. (6.58kg)
Chuck Size 7/8” x 3 1/4” (22.2mm x 82.6mm)
Air Inlet (NPT) 1/2” (12.7mm)
Air Consumption 36cfm (1.02m3/min)
Specifications
15# (6.58kg) Rock Drill (009052-00000)
When ordering replacement parts you need to furnish the model and serial number of the drill tool.
FIG. Part # Description QTY
1 009052-00004 CYLINDER 1
1B 009052-00006 CYLINDER “O” RING 1
2 009052-00017 VALVE GASKET 1
3 009052-00008 PISTON 1
4
009052-00007 VALVE 1
5 009052-00025 UPPER VALVE BLOCK 1
6 009052-00026 VALVE ASSEMBLY 1
7 009052-00027 GUIDE BUSHING 1
8 009052-00029 DOWEL PIN 2
8A
009052-00034 LOCATION PIN 2
9 009052-00009 SEAL PLUG 1
9B 009052-0009B BLOW TUBE 1
21 009052-00022 HOUSING 1
21A 009052-00021 HEAD 1
22
009052-00035 SIDE ROD 2
23 009052-00036 SIDE ROD NUT 2
25 009052-00024 NUT 1
28 009052-00005 RETAINER 1
FIG. Part # Description QTY
29 009052-00031 BOLT 1
30 009052-00003 RETAINER BOLT NUT 1
31 009052-00032 WASHER 1
32 009052-00030 CONE WASHER 1
33
009052-00002 AIR INLET PLUNGER 1
34 009052-00023 SPRING 1
39 009052-00028 BOLT 1
40 009052-00015 SPRING 3
41 009052-00041 PLUNGER 2
42
009052-00020 SLEEVE 1
43 009052-00011 DRIVER 1
44A 009052-00012 CHUCK 1
45 009052-00012 BEARING 1
46 009052-00013 BEARING 2
47
009052-00019 SPRING 2
48 009052-00018 LEVER 1
49 009052-00016 BEARING 1
50 009052-00014 PLUNGER 1