32 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
✤✄
Ing YOUR fOOTPEdAL
sTEERIng
LEfT/RIgHT TOE bUTTOns
To steer: With the mode button of, left and right steering control
can be done with the Left/Right steering buttons. Holding the
left or right steering button down steers left or right. Small
steering changes of less than one degree can be made by quickly
tapping the left and right steering buttons.
HEEL/TOE PEdAL
When the mode button on, place your foot in the center of the
heel/toe pedal, rocking forward steers right. Rocking back steers
left. The yellow MODE light will be illuminated.
NOTE:
The steering system is designed to turn your motor 360
degrees. Be careful to avoid over-wrapping the coil cord around
the trolling motor shaft.
Only illuminated in
Ulterra Mode
AUTOPILOT
sPOT-LOCK
mOdE
COnsTAnT
AUTOPILOT
sPOT-LOCK
mOdE
COnsTAnT
PROP On
All Prop On functions can be used in Standard and Ulterra Mode.
NOTE:
Prop button switches to Stow/Deploy in Ulterra Mode.
mOmEnTARY bUTTOn
To operate the motor in momentary mode: Pressing either of the
two momentary buttons turns the propeller on at the footpedal
speed setting. Let up and the propeller stops.
Prop button will
not work with the MODE button engaged
.
COnsTAnT bUTTOn
To operate the motor in continuous mode: Pressing the
Mom/Con button toggles the motor between momentary and
constant. When the motor is in constant the propeller will run
continuously at the footpedal speed setting without keeping your
foot on the pedal. Even while in constant mode, however, the toe
button on the heel/toe pedal is momentary.
Prop button will
not work with the MODE button engaged.