background image

16  |  minnkotamotors.com

©2014 Johnson Outdoors Marine Electronics, Inc.

gETTIng sTARTEd

mAnUAL
COnTROL

Steer Left

Steer Right

Prop On/Off 

Speed Down

Speed Up

Trim Up

Trim Down

High Speed Bypass

Toggles the motor speed 
between its current setting 
and speed 10.

Backlight

Turns the remote LCD 
backlighting on for six 
seconds.

Keypad Lock/Unlock

To lock or unlock the keypad, 
press and hold the backlight 
button for 3 seconds.

Stow/Deploy Motor

Advanced AutoPilot and 
AutoPilot

Turns Advanced AutoPilot on 
and of  when pressed once. Turns 
AutoPilot on when held for two 
seconds.

Cruise Control

Turns cruise control on and of  using the 
current GPS speed as the target speed.

Spot-Lock

Turns Spot-Lock on and 
records it to a memory location.

Spot-Lock Recall

Recalls a Spot-Lock from 
memory and turns spot lock on.

Track to End

Navigates to the nearest location 
on a previously recorded track 
and follows it to its end.

Track to Start

Navigates to the nearest location 
on a previously recorded track 
and follows it to its start.

Track Record

Starts and ends the recording 
of a track to a selected memory 
location.

Record Pause/Escape

Pauses the recording of a track 
and then resumes the recording 
when pressed again.

TRACKs

sPOT-LOCK

CRUIsE COnTROL/
AUTOPILOT

GPS Signal strength

Remote Battery Low

Stow/Deploy

Prop On/Of 

GPS Speed

Motor Battery Status

Keypad Lock

Track Record On

Track to Start On

Spot-Lock On

Track to End On

Memory Location

Cruise Control On

AutoPilot/Advanced AutoPilot On

Motor Speed

Summary of Contents for ULTERRA



















































Reviews: