4 | minnkotamotors.com
©2022 Johnson Outdoors Marine Electronics, Inc.
a. Make sure that the Power Cables from the battery
are disconnected or that the breaker, if equipped,
is "off."
Power Cables
Power Cables
WARNING
Make sure the motor is mounted on a level surface and is not
connected to a power source.
b. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor should be in the stowed position.
c. Remove the four Sideplate screws using a #3 Phillips
Screwdriver. Two of these screws will be located on
each side of the mount.
NOTICE:
A motor may weigh up to 65lbs. Minn Kota
recommends having a second person help with the installation.
Deployed
Deployed
Stowed
Stowed
Sideplate Screw
Sideplate Screw
1
2
2c
Installing the Top Plate to a PowerDrive or Terrova
d. Remove the Right Sideplate.
e. Swing the Left Sideplate out and away from the Base
Extrusion. Removing the sideplates exposes the
mounting holes in the Base Extrusion.
Right Sideplate
Right Sideplate
Mounting Holes
Mounting Holes
Left Sideplate
Left Sideplate
Base Extrusion
Base Extrusion
3
3e
3d