Chapter 6. Ordinary maintenance
EN
6.3. Disassembling, demolition and elimination of residuals
ATTENTION!
All disassembling and demolition operations must be done by qualified personnel with mechanical and
electrical expertise required to work in safe conditions.
Proceed as follows:
disconnect machine from power mains
disassemble components
All wastes must be treated, eliminated or recycled according to their classification and to the procedures in
force established by the laws in force in the country where the equipment has been installed.
The symbol indicates that this product shall
not
be treated as household waste. By making sure that the
product will be properly disposed of, you will facilitate the prevention of potential negative effects for the
environment and human health, which might be otherwise caused by the improper waste treatment of
this product. For more detailed information about the recycling of this product, please contact the product
seller or, as an alternative, the after-sales service or the corresponding waste treatment service.
Chapter 7. Guarantee
EN
7.1. Certificate of guarantee
The guarantee runs for 12 months after the installation date under the conditions set out in the instruction manual. Fill in
the card with all data requested, tear out along the perforations and send in.
7.2. Guarantee conditions
The guarantee runs for 12 months and comes into force on the installation date of the machine. The guarantee covers
free replacement or repair of any parts due to defects arising from faulty material. The repairs or replacement are
usually carried out at the manufacturer’s premises, with transport or labour charged to the buyer. If the repair or
replacement is carried out at the buyer’s premises, he shall bear the travelling, transfer and labour costs. Work under
guarantee can be carried out exclusively by the manufacturer or by the authorised dealer. In order to be entitled to
repairs under the guarantee, the faulty part must be sent for repair or replacement to the manufacturer or his authorised
dealer. The return of such repaired or replaced part will be considered fulfilment of the guarantee. The guarantee is
voided:
in case of failure to mail the CERTIFICATE OF GUARANTEE, duly filled in and signed, with in 20 days after the
date of purchase.
in case of inappropriate installation, power supply, misuse and mishandling by unauthorised persons.
in case of changes made to the machine without prior agreement in writing from the manufacturer.
if the machine is no longer the property of the first buyer.
The manufacturer declines all liability for personal injury or damage in case of inappropriate installation or
connection to the power mains or omission of connection to earth or in case of any mishandling of the
machine. The manufacturer undertakes to carry out any variations and changes made necessary by technical
and operating requirements.
IN THE EVENT OF DISPUTES THE COURT OF BERGAMO (ITALY)
SHALL HAVE SOLE JURISDICTION.
58
Summary of Contents for MF21BA54
Page 90: ......
