The hotkey functions
2-4
To erase a sequence of characters:
1.
Navigate to the first character in the sequence.
2.
Press and hold the Spacebar down until you erase the sequence.
Saving changes
To save all editing changes and return to the Select Computer window:
Press
Esc
.
Editing the Name section
You can substitute the text in the Name section with up to 30 characters in each of the two lines. A space
constitutes a character.
Editing the Computers section
The numbering at the start of each line is unalterable.
You can substitute the text that appears after the number with up to 20 characters per line.
Editing a group of lines
You can edit a group of lines with the same data change.
To edit a group of lines:
1. Navigate to the first line you want to change.
2. Type the desired change.
3. Press
End
,
End
. The rest of the column downwards takes on the same change.
The Setup window - F3
You set parameters, and configure settings, in the Setup window.
To display the Setup window:
Press
F3
. The Setup window with the relevant instructions and hotkeys appears. See Figure 2-5.
Figure 2-5 The Setup window
The
Setup
window contains 7 columns, as follows:
