Mini COUNTRYMAN PLUG-IN HYBRID, Owner'S Manual

Page: 245 / 344

Removing the cargo floor panel
1. Fold the rear part of the cargo floor
panel upward.
2. Grasp the cargo floor panel at the rear
and fold it upward.
3. Pull the cargo floor panel backward from
the brackets.
Inserting the cargo floor panel
1. Push the cargo area floor into the sup-
ports at a shallow angle. The cargo area
floor must engage noticeably.
2. Fold the cargo area floor over down-
ward.
MINI Picnic Bench
Principle
The MINI Picnic Bench provides a comfort-
able seating surface on the loading lip of the
vehicle.
General information
Only use the MINI Picnic Bench while the
vehicle is parked and with the tailgate open.
When the MINI Picnic Bench is not in use,
fold it in to prevent contamination and dam-
age.
In vehicles with a no-touch opening and
closing tailgate:
If the vehicle key is in the sensor area, the
tailgate may open or close inadvertently if
you unintentionally move your foot or if a
foot movement is detected.
The sensor has an approximate range of
5 ft/1.50 m extending from the rear area.
Safety information
Warning
Body parts can be jammed when operating
the tailgate. There is a risk of injury. Make
sure that the travel path of the tailgate is
clear during opening and closing.
Overview
The MINI Picnic Bench is located on the un-
derside of the cargo area floor.
Mounting
1. Fold the rear part of the cargo floor
panel upward.
2. Place the MINI Picnic Bench on the
front part of the cargo floor panel and at-
Seite 245
Cargo area CONTROLS
245
Online Edition for Part no. 01405A54208 - II/22