Mini COOPER SE, Owner'S Manual

Page: 79 / 286

After drive-ready state is switched off
by pressing the Start/Stop button, the
locked vehicle is automatically un-
locked.
Confirmation signals from the
vehicle
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. Deactivate or activate the desired con-
firmation signals.
– "Flash for lock/unlock"
Unlocking is signaled by two flashes,
locking by one.
– With alarm system:
"Acoustic signal for lock/unlock"
Unlocking is signaled by one honk of
the horn.
Alarm system
General information
When the vehicle is locked, the vehicle
alarm system reacts to the following
changes:
– Unauthorized opening of a door, the
hood or the tailgate.
– Movements in the car's interior.
– Changes in the vehicle tilt, for instance,
during attempts at stealing a wheel or
when towing the vehicle.
– Disconnected battery voltage.
– Improper use of the socket for Onboard
Diagnosis.
– Locking the vehicle while a device is
connected to the socket for the OBD On-
board-Diagnosis. For socket for the OBD
Onboard Diagnosis, refer to page 249 .
The alarm system signals these changes vis-
ually and acoustically:
– Acoustic alarm:
Depending on local regulations, the
acoustic alarm may be suppressed.
– Visual alarm:
By flashing of the hazard warning sys-
tem and headlights, where required.
Do not modify the system to ensure func-
tion of the alarm system.
Overview
Indicator light on the interior mirror.
Switching on/off
The alarm system is switched on or off as
soon as the vehicle is locked with the vehi-
cle key or unlocked or locked via Comfort
Access.
Opening the doors with the alarm
system switched on
The alarm system is triggered when a door
is opened if the door was unlocked using
the integrated key in the door lock.
Switching off the alarm, refer to page
80 .
Seite 79
Opening and closing CONTROLS
79
Online Edition for Part no. 01405A02680 - II/20