Mini COOPER SE, Owner'S Manual

Page: 251 / 286

4. Pull the wiper blade down out of the
holder on the wiper arm, arrow 1.
5. Pull the wiper blade free from the holder
of the wiper arm, arrow 2.
6. Insert and latch a new wiper blade in re-
verse order.
7. Fold down the wiper arm.
Replacing the rear wiper blade
1. Fold up and hold the wiper arm firmly.
2. Turn the wiper blade all the way back.
3. Push the wiper blade out of the fasten-
ing by continuing to turn it all the way.
4. Insert the new wiper blade by following
the steps in reverse order. The wiper
blade must engage audibly.
5. Fold down the wiper arm.
Light and bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contri-
bution to vehicle safety.
The manufacturer of the vehicle recom-
mends that you have appropriate work per-
formed by a dealer’s service center or an-
other qualified service center or repair shop
if you are unfamiliar with it or if it has not
been described here.
A spare light box is available from a dealer's
service center or another qualified service
center or repair shop.
Follow the safety information, refer to
page 251 .
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
source. These light-emitting diodes are re-
lated to conventional lasers and are offi-
cially designated as Class 1 light-emitting
diodes.
Follow the safety information, refer to
page 251 .
Safety information
Lights and bulbs
Warning
Bulbs can get hot during operation. Con-
tact with the bulbs can cause burns. There
is a risk of injury. Only change bulbs after
they have cooled off.
Seite 251
Replacing components MOBILITY
251
Online Edition for Part no. 01405A02680 - II/20