Mini COOPER SE, Owner'S Manual

Page: 131 / 286

General information
The warning is repeated if the vehicle speed
exceeds the set speed limit again, after it
has dropped below it by 3 mph/5 km/h.
Adjusting
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Warning at:"
5. Turn the Controller until the desired
speed is displayed.
6. Press the Controller.
Activating/deactivating
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
Setting your current speed as the
speed warning
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
LED ring on the central in-
strument cluster
Concept
The LED ring displays light animations to
represent specific functions.
Basic displays
Basic functions, such as the state of charge
of the high-voltage battery, can be set to be
displayed continually if so desired.
Event displays
Functions that are only displayed tempora-
rily, for instance the volume or temperature
settings, can be set as event displays.
Several vehicle assistance functions can
also be displayed on the LED ring. This dis-
play corresponds with the displays of the
function in the respective display.
Switching on/off LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Center Instrument"
Adjusting the LED ring
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Center Instrument"
5. "Basic display" or "Event display"
6. Select the desired setting.
Setting the brightness
The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
Seite 131
Displays CONTROLS
131
Online Edition for Part no. 01405A02680 - II/20