Mini COOPER SE, Owner'S Manual

Page: 255 / 286

Charging the battery
General information
For charging a discharged battery, refer to
page 226 .
Safety information
NOTICE
Battery chargers for the vehicle battery
can work with high voltages and currents,
which means that the 12 volt on-board
network can be overloaded or damaged.
There is a risk of damage to property. Only
connect battery chargers for the vehicle
battery to the starting aid terminals in the
engine compartment.
Power failure
After a power loss, some equipment needs
to be newly initialized or individual settings
updated, for example:
– Memory function: store the positions
again.
– Time: update.
– Date: update.
– Glass sunroof: initialize the system.
Disposing of old batteries
Have old batteries disposed of by a
dealer’s service center or another
qualified service center or repair
shop or take them to a collection point.
Maintain the filled battery in an upright po-
sition for transport and storage. Secure the
battery so that it does not tip over during
transport.
Fuses
Safety information
Warning
Incorrect and repaired fuses can overload
electrical lines and components. There is a
risk of fire. Never attempt to repair a
blown fuse. Do not replace a nonworking
fuse with a substitute of another color or
amperage rating.
Accessing the fuses
The fuses are located in the glove compart-
ment.
1. Open the glove compartment.
2. Swing the cover down, arrow.
Information on the fuse types and locations,
as well as the positions of any other fuse
boxes, is available on the Internet:
www.mini.com/fusecard.
Where applicable, information on the fuse
types and locations is also found on a sepa-
rate sheet in the fuse box.
Replacing fuses
The vehicle manufacturer recommends that
you have a dealer's service center or an-
other qualified service center or repair shop
replace the fuses.
Seite 255
Replacing components MOBILITY
255
Online Edition for Part no. 01405A02680 - II/20